Philips BDP5506/F7, BDP5506/F8 EN, [4], [7], [3], [7], Off, [R], [G], [OK], [PG], [OK], [OK], [OK], [OK], [OK], [OK], [OK], [OK], [OK], [PGR], (home)], [Adult], [NC-17], [PG-13], (home)]

For the first time only :

Use [the Number buttons] to enter any 4-digit number (except for 4737). That number will be used as the password. Record your password, in case you forget it.

•If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be set to “Off”.

•While you input the password, select “Clear” to clear the number, then re-enter the password.

Once a password is set :Use [the Number buttons] to enter your 4-digit password.

4.Use [K / L] to select your desired parental lock level, then press [OK].

5.Press [ (home)] to exit.

			RATING EXPLANATIONS
Off		• Parental control is inactive; all discs
			can play back.
8	[Adult]	• DVD software of any grades
			(adult / general / children) can be
			played back.
7	[NC-17]	• No one under 17.
6	[R]	•	Restricted; under 17.
5	[PGR]	•	Parental Guidance Recommended.
4	[PG-13]	• Unsuitable for children under 13.
3	[PG]	•	Parental Guidance suggested.
2	[G]	•	General Audience.
1	[Kid Safe]	•	Suitable for children.

To cancel parental lock temporarily :

Some discs allow you to cancel parental lock temporarily. With these discs, the message below will appear when you try to play them back.

“Enter current password.”

Follow the instruction which appears on the TV screen to cancel parental lock. After entering the password, “Parental Control” appears. Select desired parental lock level, then press [OK].

Change Password

1.Follow steps 1 to 2 in “Parental Control” on page 48.

2.Use [K / L] to select “Change Password”, then press [OK].

3.Use [the Number buttons] to enter your 4-digit password.4.Use [the Number buttons] to enter a new 4-digit password.

5.Use [the Number buttons] to retype the same new 4-digit password.

6.Use [K / L / s / B] to select “Confirm”, then press [OK].

7.Press [ (home)] to exit.

12.6. Software Update

(home) A	“Setup”	A	“Advanced	A	“Software
			Setup”		Update”

Philips continuously tries to improve its products and we strongly recommend that you update the software when updates are available. New software can be downloaded from our website at www.philips.com/support using the model number of your Blu-ray Disc™ Player (e.g. BDP5506) to find information.

Disc / USB Update

You can update the software by using a disc or USB storage device.

1.Use [K / L / s / B] to select “Setup” in the home menu, then press [OK].

2.Use [K / L] to select “Advanced Setup”, then press [OK].

3.Use [K / L] to select “Software Update”, then press [OK].

4.Use [K / L] to select “Disc” or “USB”, then press [OK].

5.Use [s / B] to select “Yes”, then press [OK].

6.Insert the disc or USB storage device for software update.

7.After loading the disc or USB storage device, confirmation message will appear. Select “Yes” and press [OK] to start updating.

• It may take a while to complete the update.

8.After the update finishes, this unit will restart. Remove the disc or USB storage device from the unit.

CCaution

•Please do not disconnect the AC power cord or USB storage device while executing the “Disc” or “USB” update.

EN - 49