Philips BDP5506/F7, BDP5506/F8 EN, [OK], [OK], [OK], [OK], [OK], Note, [Red], DNote, ￿Wireless, Auto Scan, DNote for “Proxy Address” and “Proxy Port”

DNote for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”

•The range of input numbers is between 0 and 255.

•If you enter a number larger than 255, the number will automatically be reset to 255.

•When you enter a wrong number, select “Clear” to clear. (The number will be reset back to “0”.)

•If you want to enter a 1 or 2-digit number in one cell, press [B] to move on to the next cell.

DNote for “Proxy Address” and “Proxy Port”

•The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than 65535, it will be regarded as 65535.)

•For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.

•Choose a connection speed in accordance with your network environment.

•When the settings are changed, the network connection may be disabled depending on the device.

￿Wireless

If you connect this unit to the network wirelessly, select “Wireless” and set up necessary settings.

Please make a note of your Wi-Fi network name (SSID) and its WEP / WPA key before proceeding with the setup.

Auto Scan

Search for Wi-Fi networks automatically and select the WiFi network name (SSID) from the list.

1.Follow steps 1 to 2 in “Auto Setup” on page 44.

2.Use [K / L] to select “Wireless”, then press [OK].

3.Use [K / L] to select “Auto Scan”, then press [OK].

•This unit will start searching for Wi-Fi networks automatically.

4.The result of Wi-Fi network searching will be displayed. Use [K / L] to select the appropriate Wi-Fi network name (SSID), then press [OK].

•If you select an SSID without “”, please go to step 6.

Please select the	Access 1
access point.
	Access 2
	Access 3
	Access 4
	Access 5
Rescan	Access 6
Cancel	Access 7

5.“Access Point Setting (Auto Scan)” screen will appear. Enter the WEP / WPA key of the selected Wi-Fi network using cursor buttons, number buttons and color key, then press [Red].

•If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi Network.

Access Point Setting (Auto Scan)

Please input the WEP/WPA key with keypad or software keyboard.

XXXXXXXXXX

Done Cancel Clear a/A/@

6. Use [K / L] to select “Continue”, then press [OK].

Please confirm the	SSID	Access 1
setting.
	Security	WPA-PSK(AES)
	WEP/WPA Key	XXXXXXXXXX
Continue
Rescan
Cancel

7.Use [K / L] to select “Auto Setup” or “Manual Setup”, then press [OK].

•If you select “Auto Setup”, follow step 5 in “Auto Setup” on page 44.

•If you select “Manual Setup”, follow steps 3 to 12 and 14 to 16 in “Manual Setup” on page 44.

DNote

•The internal wireless LAN supports following specifications

- Wi-Fi standards	: IEEE 802.11 b/g/n
- Frequency spectrum	: 2.4 GHz
- Security protocol	: WEP / WPA / WPA2

EN - 46