•• [BT UPGRADE] (Bluetooth upgrade): upgrade Bluetooth software if available.

•• [SW VER] (software version): show the software version of this unit.

Note

•• If no button is pressed within 30 seconds, the menu exits.

Listen to FM radio

Tune to a radio station

1 Press SOURCE repeatedly to select tuner source.

2 Press and hold / for three seconds.

»»The radio tunes to a station with strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a weak station:

Press / repeatedly until you find optimal reception.

Store FM radio stations automatically

Note

•• You can program a maximum of 20 preset radio stations (FM).

1 In tuner mode, press MENU to access FM tuner menu.

»»[SCAN] is displayed.

2 Press OK, and then press / to scroll the menu options:

• [Strong] (strong stations): scan stations with strong signals only.

• [All] (all stations): scan all available FM radio stations.

3 Press OK to select an option.

4 In FM tuner mode, press SCAN.

»»The stations scanned are based on the selection in step 2.

»»The unit broadcasts the first scanned

FM radio stations.

Store FM radio stations manually

1 Tune to an FM radio station.

2 Press PROG to activate programming mode.

»»[PROG] (program) blinks.

3 Press / repeatedly to select a number. 4 Press PROG again to confirm.

»»The frequency of the preset station is displayed.

5 Repeat above steps to store more FM stations.

Note

•• To remove a pre-stored station, store another station in its place.

Select a preset radio station

In FM mode, press / to select a preset number, and then press OK to confirm.

Show RDS information

Radio Data System (RDS) is a service that allows FM stations to show additional information.

1 Tune to an RDS station.

2 Press RDS/INFO repeatedly to scroll through the following information (if available).

Radio text message

Program type

Frequency

Stereo or Mono

14EN

Page 16
Image 16
Philips BTB7150 user manual Listen to FM radio