Philips BTB7150 user manual Other features, Set the alarm timer, Set the sleep timer

Start to play the device (see the device user manual).

SOURCE

MENU

Connect an audio cable (not supplied) between:

Press SOURCE repeatedly to select AUDIO IN source.

6 Other features

Set the alarm timer

This unit can be used as an alarm clock.You can select DISC, TUNER, DAB, or USB as alarm source.

Note

•• Make sure that you have set the clock correctly.

1 In standby mode, press and hold SLEEP/ TIMER for three seconds.

»»[SET TIMER] is displayed, and then [DISC] is displayed and begins to blink.

2 Press / (or SOURCE) repeatedly to select an alarm source (DISC, TUNER, DAB, or USB).

Tip

•• If DISC/USB source is selected, but no disc is placed or no USB connected, the system switches to tuner source automatically.

Set the sleep timer

To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes).

»»When sleep timer is activated, is displayed. Otherwise, disappears.

Listen to an external device

You can listen to an external device through this unit with an audio cable.

1

3 Press SLEEP/TIMER (or OK) to confirm.

»»The hour digits are displayed and begin to blink.

4 Repeat steps 2-3 to set hour, minute, and adjust volume of the alarm.

Note

•• If no button is pressed in 90 seconds, the system exits

2

3

INFO

• AUDIO IN jack (3.5 mm) on the unit;

• and the headphone jack on an external device.

timer setting mode automatically.

To activate or deactivate the alarm timer: Press SLEEP/TIMER repeatedly to view the alarm information and activate or deactivate the alarm.

»»If timer is activated, is displayed.

»»If timer is deactivated, [TIMER OFF] (timer off) is displayed and disappears.

RDS PRESET/ALBUM

VOL

MUTE REPEAT PROG

TIMER

SOUND CLOCK SLEEP

AUDIO IN

EN 15