Philips cBright 2 Series manual Introduction Things You Should Know, FCC Warning

1. Introduction 2. Things You Should Know

Table of contents
0.	Controls and connections	2
1.	Introduction	3
	Table of contents	3
	Introduction	3
	Packaging contents	3
2.	Things You Should Know	3
3.	Important Safeguards	4
4.	Projector Features	5
5.	Functional Overview	6-7
	Controls	6
	Connections	7
6.	Set Up	8-9
	Positioning the projector and screen	8
	Mains supply	8
	Adjusting the focus and size of the image	8
	Adjusting the vertical and horizontal angle of the projector ....8
	Moving the projector	9
	Transporting the projector	9
	Inserting the batteries in the remote control	9
7.	Installation	10-14
	Video/computer cables and adapter	10
	Connecting to a computer	11
	Connecting to video equipment	12
	Connecting to Component- and HDTV-video equipment	13
	Connecting to audio equipment	13
	Connecting to an external monitor	14
8.	Operation	15-19
	Preparation	15-16
	Display and Picture control	16-18
	Audio control	18
	Other settings	19
9.	Maintenance	20-22
	Cleaning	20
	Cleaning the dustfilter	20
	Lamp	21
	Lamp replacement	21
	Resetting the lamplife time	22
10. Troubleshooting		23

Introduction

Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. We are sure that, used properly, it will bring you years of enjoyment. You will want to keep this manual handy, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the ‘Important Safeguards’ section before use.

Packaging contents

Please confirm that the following items are packed in the projector box. They are provided to help you use or set up your projector.

–Projector

–Mains lead

–Audio/Video RCA Cable

–S-Video cable Cable

–RCA/Jack adapter

–Integrated VGA/USB cable

–Scart/RCA Audio Video adapter (not for USA version)

–Remote control + batteries

–Soft bag

–User Guide, Projection Assistant and more on CD-ROM

–Quick set up Card

Note: This equipment has been tested to comply with the limits for a class A digital device in accordance with Part 15 of the FCC Rules as well as the European CE marking.

Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user’s guide, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorientate or relocate the receiving antenna.

–Increase the distance between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

FCC Warning:

To assure continued compliance, use only the provided grounded mains supply lead and shielded interface cables when connecting this device to a computer. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to operate this device.

NOTE:

This Philips projector uses three LCD (Liquid Crystal Display) panels.These panels contain a total of 1,440,000 (for SVGA projectors) or 2,359,296 (for XGA projector) pixels. As with any equipment, certain tolerances apply to the performance specification of the product.

Your projector might have some inactive pixels - within acceptable tolerances - which may result in illuminated or dark dots on the picture screen. These inactive pixels will not affect the overall picture quality or the life expectancy of the projector.

Important note for users in the U.S.A.

The responsible party of this multi media projector is the following:

Philips Consumer Electronics Company

One Philips Drive

Knoxville, TN 37914

Telephone (1888) 873-4672

3