20
Sticked it onto the das hboard. •
Or clip it on the sun- shield.•
Voice dialing
You can dial a number by voice if your mobile
phone supports voice dialing.
1 Press for 3 second s.
»[VOIC DIAL] is displayed.
2 Speak a name st ored in contact lis t stored
in the phone.
The unit repeats the number and calls »
out.
»[NO MATCH] is displayed if the unit
does not recognize a number.
Make a call
1 Press SOURCE repeatedly to sel ect [BT
MUSIC].
2 Press .
3 Press or to sel ect from the following
list:
•[DIAL NUM]: dial a number dir ectly
•[DIALLED]: dialled number
•[MISSED]: missed call
•[RECEIVED]: received cal l
•[ME PBK]: Phone direct ory
•[SIM PBK]: SIM card direct ory
4 Press to confi rm the selection.
5 Use bluetooth devices
With this car audio system, you can listen
to audio fi les from a player or make a call
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
1 Turn on bluetooth function on the device.
2 Setup bluetooth f uction on your device.
3 Select “CEM25 0” in the pairing list .
4 Enter default password “0000”.
“»[CONNECT]” is displayed on the
panel if pairing succeeds.
Tip
If the paired dev ice is moved beyond the •
operationa l range, when it is b rought back,
please check if th e device is still conne cted
with the sys tem:
. If they are connec ted,
•[Disconnect] (red ico n)
is displayed.
. If connection i s lost,
•[Connect] ( green icon) is
displayed. Foll ow the instruct ion above to pair
the device with t he system again .
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone at
a location close to mouth.
1 Make sure the suppl ied microphone is
connected to the c ar audio system. (Se e
“Connect wires” section).
2 Place the microphon e at a proper
location. For exa mple,
EN