• To disconnect the device, disable the Bluetooth feature on it.
Play audio from a Bluetooth device
1 Pair the Bluetooth device with this system.
2 Press repeatedly to switch the source to [BT AUDIO].
»»Play starts automatically.
• If play does not start, press .
• To pause play, press again.
• To skip to the previous or next track,
press / .
Enter the default password "0000".
»»If the pairing is successful, [PAIRED] is displayed.
In the device list, select CMD310.
Enable it to search other Bluetooth devices.
On your device, follow the steps below.
1
2
3
6 Use Bluetooth devices
With this car audio system, you can listen to audio from a player or make a call through Bluetooth.
Pair a device
Note
•• Philips does not guarantee compatibility with all Bluetooth devices.
•• Before pairing a device with this system, read its user manual for compatibility.
Tip
•• You can also control the play on the Bluetooth device.
Make a call
Note
•• Keep the Bluetooth connection active between the system and your mobile.
E n g l i s h
Call a number
On your mobile, call a number.
»»
Redial the last called number
1 Press 
.
»»[REDIAL] is displayed.
2 Press 
to confirm.
»»
Pick up an incoming call
When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press 
to answer the call.
Reject an incoming call
Press and hold 
until [END] is displayed.
End an call
To end an 
.
Transfer voice to mobile
Press and hold 
until [TRANSFER] is displayed.
»»The loudspeakers are muted, and the voice comes from your mobile only.
EN 15
