Philips CPWBS154 manual Phone Line Configuration, Installing a Full-Rate Connection

ENGLISH 9

Phone Line Configuration

Installing a Full-Rate Connection

If you are using a full-rate (G.dmt) connection, your service provider will attach the outside ADSL line to a data/voice splitter. In this case you can connect your phones and computer directly to the splitter as shown below:

Plain Old

Telephone

System (POTS)

Residential

Connection

Point [Network

Interface

Device (NID)]

Voice

Splitter

Data

ADSL Router

or

Ethernet

hub or switch

Figure 2-3. Installing with a Splitter

Installing a Splitterless Connection

If you are using a splitterless (G.lite) connection, then your service provider will attach the outside ADSL line directly to your phone system.

In this case you can connect your phones and computer directly to the incoming ADSL line, but you will have to add low-pass filters to your phones as shown below:

Plain Old

Telephone

System (POTS)

Residential

Connection

Point [Network

Interface

Device (NID)]

Voice

Voice	Filter
& Data

Voice

& Data

Data

ADSL Router

or

Ethernet

hub or switch

Figure 2-4. Installing without a Splitter