Philips CRA01/00 manual A. Introduction, B. Package Contents, C. Brief Electrical Specifications

A. Introduction

CRA01/00 is a Loop-Through (LT) interface card designed to support VGA content connectivity and RS232 control in daisy chain configurations on select Philips SmartCard-enabled displays. Please refer to the product leaflet for the detailed feature specifications.

This guide will provide the basic steps for installing the LT card into a Philips SmartCard-enabled display.

B. Package Contents

Your CRA01/00 package should contain the following:

1 x LT card module

1 x LT card cap (see Fig. 1 below)

1 x VGA cable (30cm/ 11.811”)

1 x RS232 cable (20cm/ 7.874”) Installation Guide (this document) Global Warranty Card

Fig. 1 – LT card cap

C. Brief Electrical Specifications

Supply Voltage:	12V +/- 10%
Supply Current:	0.12A (Nominal)
Power Consumption:	1.44 W (Nominal)

Page 2 of 9	LT Installation Guide 1.1 (140907)
	12NC: 3139 125 39281