Philips CRA01/00 manual Screws to be fastened, Page 5 of, LT Installation Guide, 12NC

Models: CRA01/00

1 9

Page 5

7.Insert the LT card into the SmartCard slot as shown below. Ensure that the card is securely connected to the internal 32-pin socket.

8.Secure the LT card to the display by re-fastening the screws that were removed in step 4.

9.Use the included VGA cable to connect the VGA Local on the LT card to the VGA In on the display as shown.

10.Use the included RS232 cable to connect the RS232 Local on the LT card and the RS232 In on the display as shown.

Page 5 of 9	LT Installation Guide 1.1 (140907)
	12NC: 3139 125 39281

Image 5

Contents

CRA01/00 Loop-Through Card Installation GuideA. Introduction B. Package ContentsC. Brief Electrical Specifications Connector E. Installation InstructionsD. Loop-Through Card I/O Interfaces ApplicationLT Installation Guide high-rise DB 15 connectorsPage 4 of 12NC 3139Screws to be fastened LT Installation GuidePage 5 of 12NCF. Connection Instructions BDLX231BDLX231 BDLX231BDLX231 G. TroubleshootingBDLX231 BDLX231How many units can be daisy chained RS232 doesn’t seem to work properly via the LT cardImportant general remarks LT Installation Guide LT Card CRA01/00 Installation GuidePage 9 of 12NC