Philips CRT TV warranty Preparation, ‘ Pronto Remote Control

ANT. / CABLE

TV

power 1 2 3

source 4 5 6

freeze 7 8 9

surf0

Preparation

Do not insert the power plug in a wall socket before all connections are made.

&Place the TV on a solid surface.

min. 4ft

For ventilation, leave at least 2” free all around the TV. Do not place the TV on a carpet.

To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water.

éConnect a cable TV signal to the ANT./CABLE jack at the back of the TV. For best picture quality use the suppressor-aerial cable supplied.

“Insert the power plug in the wall socket. Refer to the rear of the TV set for the correct operation voltage. Consult your local dealer if your AC power supply is different.To prevent damaging the power (AC) cord which could cause a hazard, do not place the TV on the cord.

‘Pronto Remote Control

Refer to the separate full-use Pronto Owner’s Manual supplied for complete details on its function and operation.

After having inserted the (4-AA) batteries into the battery compartment, be sure TV is selected for the current device tab item category.

(Turn the TV on

Press the power switch A on the front of your TV or tap the power button on the first of three Pronto touchscreen TV control panels.

A green LED on the front of the TV lights up and the screen comes on.

When you switch on your set for the first time, the Install menu automatically appears on the screen.

Follow the instructions shown on the screen to guide you through the first time setup and use of your TV.

4Preparation