Preparations
English
2Press and hold the PAIR button on the rear of the subwoofer for three seconds to activate signal receiving.
➜ The LED indicator on the subwoofer flashes in blue and green alternatively .
●If the connection succeeds, the display shows “PASS”.
●If the connection fails or the connection cannot be set up successfully within 60 seconds, the display shows “FAIL”.
Notes:
–The wireless connection will be disconnected automatically after
–See “Basic Functions - Switching the system to Eco Power Standby mode” for how to switch between Eco Power Standby mode and standby mode.
CAntenna Connection
FM Antenna
It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit.
●Adjust the FM antenna for optimal FM stereo reception.
DOptional connection
The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.
Connecting a USB mass storage device
or SD/MMC memory card
By connecting a USB mass storage device or SD/ MMC memory card to the
●Insert the USB device's USB plug into the socket on the set.
OR
for the devices with USB cables:
1Insert one plug of the USB cable (not supplied)
to the | socket on the set. |
2Insert the other plug of the USB cable to the USB output terminal of the USB device.
OR
for the memory card:
●Fully insert the memory card (metal contact facing left) into the SD / MMC slot on the top of the system.
Connecting other equipment to your
system
This feature allows you to listen to music from the external equipment throught the powrful speakers of the
●Use an
Note:
– Refer to the operating instructions for the connected equipment for details.
10
