Preparations
Mounting the set onto wall
See the separate sheet of Wall mounting instructions on how to mount the set onto wall.
Note:
–To secure the mounting on wall, cement wall is required.
Using Remote Control
IMPORTANT!
–Before using the remote control, remove the insulation plastic tab as shown in the picture below.
–If the remote control does not function correctly or the operating range is reduced, replace the battery with a new (CR2025) battery.
Using the Remote Control to operate
the Player
1Aim the Remote Control directly at the remote sensor (IR) on the front panel.
2Select the source you wish to control by pressing one of the source select buttons on the remote.
3Then select the desired function (for example, ÉÅ, ¡ or ™).
CAUTION!
–Remove battery if it is exhausted or will not be used for a long time.
–Battery contains chemical substances, so they should be disposed of properly.
–Perchlorate
English
1Push to open the battery tray.
2Replace a new battery according to the indicated polarity.
3Push the battery tray back to close it.
11