Clock/Timer
Clock setting
The clock can be set in either
1In standby mode, press and hold PROG/SET TIME on the remote control.
2Press VOLUME+/- on the system (or VOL +/- on the remote control) to switch between 12 hour and 24 hour display.
3Press PROG/SET TIME on the remote control again to confirm.
➜ The clock digits flash on the display panel.
4Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the hours.
5Press PROG/SET TIME on the remote control again.
➜ The clock digits for the minutes flash.
6Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the minutes.
7Press PROG/SET TIME on the remote control to confirm the time.
Timer setting
●The system can be used as an alarm clock, whereby the TUNER (FM)/iPod/USB/CARD (SD/MMC) is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used.
●During setting, if no button is pressed within 30 seconds, the system will exit timer setting mode automatically.
1In standby mode, press TIMER for more than two seconds.
2Press SOURCE on the system repeatedly (or the respective source keys on the remote control) to select the sound source.
3Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash.
4Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the hours.
5Press TIMER again.
➜ The clock digits for the minutes flash.
6Press VOLUME +/- on the system (or VOL +/- on the remote control) to set the minutes.
7Press TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating timer
●In standby or during playback, press TIMER once on the remote control.
➜ Display shows if activated, and disappears if deactivated.
Notes:
–Timer is not available in AUX mode.
–If USB/SD/MMC source is selected and no compatible USB/SD/MMC device is plugged, TUNER will be selected automatically.
English
21
