DSX5500_5540 11/13/02 12:21 PM Page 18
Setup Wizard
If your equipment has been professionally installed, skip this first time setup section and go to page 19.
After the DIRECTV® Receiver has been connected to your compo- nents, it is time to turn the DIRECTV Receiver on.
1.Press the SAT button on the remote control. The LED will blink.
2.Press the POWER button on the remote control.
3.Use the ▲▼ buttons to select your preferred language of the on screen menus and guide and press OK.
4.When the Welcome screen displays, press the OK button on the remote control to start the Setup Wizard. The Setup Wizard is a first time setup that automatically steps you through the installation process. This screen will ONLY appear the very first time your DIRECTV Receiver is turned on.
a.Enter the ZIP code.
Note: The ZIP code is critical to point your dish accurately (refer to page 32).
b.Configure the dish (refer to page 32).
c.Point the dish (refer to page 32).
d.Test the System (refer to page 33).
5.After you have installed your DIRECTV System, you should contact DIRECTV to order DIRECTV® programming at
Select a preferred language for the text display in the menus and program guide.
Seleccione un idioma para ver el texto de los menúes y la guía de programa.
English
Spanish
Welcome
Follow these 4 easy steps and be on your way to enjoying a new viewing experience.
Select OK to go the
Setup Wizard.
Skip the Setup Wizard
by pressing down then OK.
Go to Setup Wizard
Skip Setup Wizard
18
