Philips DVD1010 manual Connect to optional equipment, Digital multi-channel sound

English

8 7 6

		II	Y
DIGITAL AUDIO OUT	STEREO OUT	AUX-VCR

PCM - MPEG2 - DOLBY DIGITAL - DTS

CB

LEFT

MAINS				RIGHT	I		CR
					TV-OUT
OUT	OUT	OUT	ANALOG		(CVBS)	(Y/C)	(Y-Cr-Cb)
OPTICAL	OPTICAL	COAX			VIDEO OUT	S-VIDEO OUT	VIDEO OUT

	off	no	off
Digital output	Off
Analog output	PMC only
Night mode	All
Karaoke vocal

Connect to optional equipment

Connecting to an amplifier equipped with two channel analog stereo

●Connect the audio Left and Right output sockets to the corresponding sockets on your amplifier, receiver or stereo system. For this use the audio cable (6) supplied.

Connecting to an amplifier equipped with two channel digital stereo (PCM)

1Connect the player’s digital audio output (optical 8 or coaxial 7) to the corresponding input on your amplifier. For this use an optional digital (optical 8 or coaxial 7) audio cable.

2You will need to activate the player’s digital output (see ‘Personal Preferences’).

Connecting to an A/V receiver with multi-channel decoder (Dolby Digital, MPEG 2 and DTS)

Digital multi-channel sound

The digital multi-channel connection provides the optimum sound quality. For this you need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver to find out if your receiver supports one of these formats.

1Connect the player’s digital audio output (optical 8 or coaxial 7) to the corresponding input on the receiver using an optional digital (optical 8 or coaxial 7) audio cable.

2You will need to activate the player’s digital output (see ‘Personal Preferences’).

Note: If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound. The audio format of the DVD disc in play is displayed in the Status Window when changing the language.

6-Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a digital multi-channel decoder.

18PREPARATION