Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGI- TAL AUDIO IN jack on the Stereo Receiver.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the supplied red/white audio cables. To connect the supplied RF coaxial cable, see step 2 on page eight. To connect the red/white audio cables, see step 2 on page 11.

DVD740VR 4/12/02 12:08 PM Page 13

Hookups (cont’d) 13

DVD/VCR to a TV and to a Stereo Receiver that is Dolby Digital-compatible

Using Digital Audio connections

1Antenna/Cable TV

Signal

ANT-IN

ANT-OUT

CH3 CH4

VIDEO IN

Back of TV (example only)

DVD/VCR

IN

DVD/VCR

COMPONENT

 

 

OUT

VIDEO OUT

 

 

 

 

 

 

L

 

DVD/VCR

Y

 

 

 

AUDIO OUT

 

DIGITAL AUDIO OUT

AUDIO

 

 

 

S-VIDEO

R

 

L

Cb

PCM/MULTICHANNEL

 

OUT

COAXIAL

VIDEO R Cr

3

2

Stereo Receiver

COAXIAL

DIGITAL

AUDIO IN

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2

3 Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use component video cable or S-Video cable instead for the DVD Player, see pages 11-12. You will still need the yellow video cable or RF coaxial cable for VCR features.

4 Plug in the power cords of the stereo receiver, TV, and DVD/VCR. Turn on the stereo receiver and select its Auxiliary IN channel. Turn on the TV and set it to the correct Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 15 before turning on the DVD/VCR.

Remember...

Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel Dolby Digital Surround Sound in the DVD Disc menu.

If you connect the DVD/VCR to a Dolby Digital Stereo Receiver, set DOLBY DIGITAL to ON in the DVD Player’s Setup menu. Details are on page 70. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo Receiver, set DOLBY DIGITAL to OFF. Incorrect settings may cause noise distortion and damage the speakers.

Page 13
Image 13
Philips DVD740VR owner manual 1Antenna/Cable TV Signal