Philips DVD740VR owner manual Time Search, Press VCR, then press Search MODE/TIME Search

DVD740VR 4/12/02 12:09 PM Page 41

VCR

Follow the steps below to program the DVD/VCR to search for- ward or backward on a tape a specific length of time. There must be a tape in the DVD/VCR.

●Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR.

1 Press VCR, then press SEARCH MODE/TIME SEARCH.

TIME SEARCH

0:00

ENTER SEARCH TIME

2 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or backward. For example, for 1 hour, 25 min- utes, press Number buttons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.

3 Within 10 seconds, press FF g (B) or REW h (s). The DVD/VCR will skip over the specified length of time, then begin playback.

3

2

Time Search 41

		POWER
MARKER
SETUP	AUDIO SUBTITLE	ANGLE
REC/OTR	REPEAT	REPEAT
		A-B
	CHANNEL/SKIP
	CLEAR
TITLE	MODE	RETURN	1
	OUTPUT SELECT
DVD		VCR
DISC
MENU		OK
STOP		PLAY
REW		FF
	PAUSE

TIMER SET

1 2 3

VCR/TV

4 5 6

MEMORY

7 8 9

SPEED

+10 0

SEARCH MODE DISPLAY ZOOM SLOW

TIME SEARCH STATUS/EXIT

Helpful Hints

•If you want to search for more than 59 minutes, you must enter the length of time in hours and minutes. For example, to search forward 70 minutes, press 1,1,0 at step 2.

•You cannot do a Time Search while recording.

•To remove the Time Search display, press SEARCH MODE/TIME SEARCH again.

•To cancel a Time Search that is in progress, press STOP C (p).

•If the end of the tape is reached during a Time Search, the Time Search will be cancelled. The DVD/VCR may rewind the tape. Details are on page 43.