Philips DVD740VR owner manual Remote Control Setup, Putting Batteries in the Remote Control

DVD740VR 4/12/02 12:08 PM Page 14

14 Remote Control Setup

Putting Batteries in the Remote Control

	Remove the battery compartment lid on the bottom
1 lid.of the remote control by pressing the tab, then lifting the
2	Place two AA batteries inside the battery compart-
	ment with their + and – ends aligned as indicated.
3 Replace the battery compartment lid.

Using the Remote Control

●Point the remote control at the DVD/VCR’s remote sensor (see page 20) when using the remote control to operate the DVD/VCR. Do not point the remote control at the TV.

●Do not put objects between the remote control and the DVD/VCR.

Recycling Guidelines/Battery Safety

●Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly dis- posed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemi- cal waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.

●Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury or damage to the unit:

Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;

Do not mix batteries, for example, old with new or carbon with alkaline; and

Remove batteries when the unit will not be used for a long time.

1

2

3