Philips DVDR5350H user manual Leave the External Receiver ‘ON’ overnight, Antenna RF lead

Step 4: Set-up the GUIDE Plus+ system (continued)

e)Identify the socket through which your external receiver is plugged into the recorder (for example ‘EXT 2’ for EXT2 AUX-I/O) and press OK.

{Antenna (RF lead) }

Select this if the external receiver is connected via the antenna cable. Enter the programme number which your external receiver is turned to on your recorder.

C If you have connected an external receiver, ensure that the G-LINK transmitter is properly connected and positioned, see page 19.

This will allow you to control the tuner of the Satellite Receiver/Cable Box through the GUIDE Plus+ system.

D Turn on the external receiver and use the receiver’s remote control to select programme number {02} on the receiver.

E Press OK to continue.

The GUIDE Plus+ system is sending signal via the G-LINK connection to the external receiver to switch to a certain programme number.

F If the external receiver has switched to the programme number displayed on the TV, select { Yes } and press OK.

Otherwise, select { No } and press OK to try a different code. Repeat this process until the external receiver switches to other programme number.

G Press the Green button to return to the setup screen.

H If you want to specify the source and programme number of a GUIDE Plus+ host channel, select { Host Channel Setup } in the menu and follow the instructions on the TV to complete the setup.

The default host channel setup is set to ‘Automatic’.

I Once complete, press GUIDE to exit the menu.

1)Leave the recorder in ‘standby’ mode during the night to load the TV listing data.

2)If you use an External Receiver, you have to tune your External Receiver manually to your host channel, see below table for details.

Leave the External Receiver ‘ON’ overnight.

Note: If you tune to your Host Channel before going into ‘standby’, your recorder will start immediately to download TV listings data. EPG DOWNLOAD will shown in the display panel. This process can take up to two (2) hours. You can stop the download at any time by turning the device ‘on’. Alternatively you can leave the recorder in ‘standby’ overnight and your recorder will perform the TV listings data download automatically.

Country/City	Host Channel	Host Channel
(Language)	(aerial / cable)	(SAT)
Deutschland	Eurosport	Eurosport Astra1 19.2E
Österreich	Eurosport	Eurosport Astra1 19.2E,
		Hotbird 13.0E
Schweiz (Deutsch)	Eurosport	Eurosport Astra1 19.2E
United Kingdom	ITV	British Eurosport Astra2 28.2E
France	Canal +
España	Tele 5
Nederland	TMF/Eurosport	TMF Astra1 19.2E /
		Hotbird 13.0E
-Eindhoven	TMF	TMF Astra1 19.2E
-Rotterdam	TMF	TMF Astra1 19.2E
-Amsterdam	TMF	TMF Astra1 19.2E
België (Vlaanderen)	TMF
Italia	Sport Italia

Check your TV listings line-up on the

{ Editor } screen the next day to ensure the data download is completed, see page 31.

Helpful Hints:

–If your country/region is not in the list above or you are not able to receive TV listings data, you can still use the GUIDE Plus+ system for ShowView and manual recordings.

–If a problem comes up during the GUIDE Plus+ system set-up, please visit the website at www.europe.guideplus.com for further assistance.

English

TIPS: After completing the setup, leave the recorder in standby mode and turn on your external receivers overnight to receive the TV listing data.

27

dvdr5350H_EU_Eng537.indd 27 2005-09-16 2:25:44 PM