Philips DVDR5350H user manual Tuner

Record to Hard Disk or recordable DVD (continued)

English

Recording from an external device (VCR/DVD player)

You can record from an external device which is connected to this recorder’s input socket. For copy protected material, it cannot be recorded on this recorder.

IMPORTANT!

It is not possible to record the disc playback from this recorder to its HDD.

TUNER

A Connect the external device to this recorder (see page 20).

B Turn on the TV to the correct programme number for the recorder (e.g. ‘EXT’, ‘0’, ‘AV’).

C Turn on the recorder and press CAM on the remote control.

A warning message appears.

D To continue, select to record to { Hard Disk } or { Recordable DVD } in the menu and press OK to confirm.

 All the contents in the temporary HDD storage will be cleared except for the ‘marked’ recordings.

Otherwise, select { Cancel } in the menu and press OK to abort the operation.

E Press CHANNEL +- repeatedly to select the correct input channel that matches the connected socket of the device.

{ CAM 1 } : S-VIDEO or VIDEO socket at the front.

{ EXT 1 } : EXT1 TO TV-I/O scart socket at the back.

{ EXT 2 } : EXT2 AUX-I/O scart socket at the back.

F Start playback on the connected device. G Press REC  to start recording.

To pause the recording, press PAUSE Å. To continue recording, PAUSE Åagain.

You can use this function to avoid unwanted recording.

A new chapter marker is created after recording restarts.

H To stop the recording, press STOP . I To end the recording operation, press

TUNER.

Helpful Hint:

–If ‘X’ appears at the bottom of the TV screen, it means that there is no video signal received from the current input channel.

TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a recordable DVD, see page 35.

46

dvdr5350H_EU_Eng537.indd 46 2005-09-16 2:26:25 PM