Philips DVDR630VR Timer Recording with Showview System, Checking Timer Recording Details

Timer Recording with SHOWVIEW® System

	This system makes programming timer recordings very
English	simple. Most TV guides publish SHOWVIEW programming
	numbers with their program details.If you want to make
	a timer recording of a program, you just input the corre-
	sponding SHOWVIEW programming number. The date,
	start, stop and channel settings are made automatically.
	All you have to do is tell the recorder the recording
	mode and quality, and whether it’s a once-only record-
	ing, or a regular recording.
	Up to 8 timer programs can be stored in the recorder.
	1	Press SHOWVIEW.
		The SHOWVIEW menu will appear.
		Press SHOWVIEW again to exit the menu.
			SHOWVIEW
			Number

0-9 Input OK OK CLEAR Delete Close

2enter the SHOWVIEW programming number.

• If you make a mistake before pressing ENTER,Use the number buttons then press ENTER to

press CLEAR repeatedly to delete password numbers one by one then correct it.

To check the programming, the Timer Record menu will appear.

Timer Record					SP	198 min Free
Media	PR		Date	Start Time	End Time	Mode	PDCVPS/
DVD	9	16/05 Sun		10:07	11:00	SP		ON
OK	OK	C07	TIMER Timer Rec List			Close

You can change the settings as required (Mode,

VPS/PDC, etc.)

Follow steps 2-5 as shown on previous page

3 (Timer Recording).

Checking Timer Recording Details

Programming can be checked whenever the Recorder is turned on. Press TIMER twice.

•Use v / V to select a timer recording.

•Press ENTER to edit the selected program. Timer Record menu appears.

•Press CLEAR to delete the selected program from the Timer Record List.

Timer Record List

Media PR	Date Start Time	Length	Mode	VPS/	Check
				PDC
11	16/05 Sun 10:12	30min	SP	ON	Rec. OK

OK Edit CLEAR Delete TIMER Timer Rec Close

Canceling a Timer Recording

You can clear a timer setting anytime before the record- ing actually starts.

•Use v / V to select a program you want to erase on the Timer Recorder List. If you want to erase the program, press CLEAR.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel the program.

•Press STANDBY-ON.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not record when:

•There is no disc (or tape) loaded.

•A non-recordable disc (or tape) is loaded.

•Disc Protect is set to ON in the Setup menu (see page 30).

•Power is turned on. (Please ensure that the set is in Standby mode for Timer recording to activate.)

•There are already 49 titles recorded on the disc.

You cannot enter a timer program when:

•A recording is already underway.

•The time you’re trying to set has already passed.

•There are already 8 timer programs set.

If two or more timer programs overlap:

•The earlier program takes priority.

•When the earlier program finishes, the later program starts.

•If two programs are set to start at exactly the same time, the program entered first takes priority.

If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows “Rec. OK”, it may not be.

46