•[Unlock] - Play all discs. [OSD Language]
Select a language for
Switch automatically to standby at the preset time.
•[Off] - Disable sleep mode.
•[15 Mins], [30 Mins], [45 Mins], [60 Mins] - Select the countdown time for this product to
switch to standby. [Auto Standby]
Turn on/off the auto standby mode.
•[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).
•[Off] - Disable the auto standby mode. [DivX(R) VOD Code]
Display the DivX® registration code and deregistration code.
•[Registration] - Obtain a registration code to register this product on website.
•[Deregistration] - Obtain a deregistration code to cancel the registration of this product on website.
Note
•Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.
Audio setup
1Press SETUP.
» [General Setup] menu is displayed.
2Press 
to select [Audio Setup], and then press 
to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
•To return to the previous menu, press 
BACK .
•To exit the menu, press SETUP.
[Analogue Output]
Select an analogue setting based on the audio device that is connected through the analogue audio jack.
•[LT/RT] - For the surround sound output through two speakers.
•[Stereo] - For the stereo output.
•[Multi Channel] - For
Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).
•[Digital Output] - Select a type of digital output.
•[All] - Support
•[Off] - Disable digital output.
•[PCM Only] - Downmix to
•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
•[48kHZ] - For discs recorded at sampling rate of 48 kHz.
•[96kHZ] - For discs recorded at sampling rate of 96 kHz.
Note
•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].
•The higher the sampling rate, the better the sound quality.
[HDMI Audio]
Select the HDMI audio setting when you connect this product and the TV with an HDMI cable.
•[On] - Allow audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to
•[Off] - Disable the audio output from HDMI devices connected to this player.
[Audio Sync]
Set the delay time for audio output when you play a video disc.
1.Press OK.
2.Press 
to set the delay time.
3.Press OK to confi rm and exit.
[Volume]
Set the default volume level when you play a disc.
English
EN 15
