Connect multi channel receiver
FRONT L | REAR L | CENTER |
FRONT R | REAR R | SUBWOOFER |
MULTICHANNEL
AUDIO IN
1Connect the audio cables (not supplied) to:
•the AUDIO OUT (FRONT L/R, REAR L/R, CENTER and SUBWOOFER) jacks on this product.
•the audio input jacks on the device.
Connect to digital amplifi er/receiver
DIGITAL IN
DIGITAL
OUT
COAXIAL
1Connect the audio cables (supplied) to:
•the AUDIO OUT FRONT L/R jacks on this product.
•the audio input jacks on the TV.
Connect USB fl ash drive
1Connect a USB fl ash drive to the
jack on this product.
Note
•This product can only play/view MP3, WMA, WMV, DivX (Ultra) or JPEG fi les that are stored on a USB fl ash drive.
•Press the 
button to access the content and play the fi les.
Connect power
Caution
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product.
•Before connecting the AC power cord, ensure you have completed all other connections.
1Connect a coaxial cable (not supplied) to:
•the COAXIAL jack on this product.
•the COAXIAL/DIGITAL input jack on the device.
Connect analogue stereo system
AUDIO IN
FRONT L
FRONT R
Note
•The type plate is located on the back of the product.
1 Connect the AC power cable to the wall
socket.
» The product is ready to be set up for use.
4 Get started
Prepare the remote control
1Press and push the battery compartment to slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct polarity
8EN
