Philips DVP3588K Audio setup, Press Setup » General Setup menu is displayed, Hdmi Audio

[Sleep Timer]

Switch automatically to standby at the preset time.

•[Off] - Disable sleep mode.

•[15 Mins], [30 Mins], [45 Mins], [60 Mins] -

Select the countdown time for this product to switch to standby.

[Auto Standby]

Turn on/off the auto standby mode.

•[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).

•[Off] - Disable the auto standby mode. [DivX(R) VOD Code]

Display the DivX® registration code and deregistration code.

•[Registration] - Obtain a registration code to register this product on website.

•[Deregistration] - Obtain a deregistration code to cancel the registration of this product on website.

Note

•Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Audio Setup], and then press .

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press .

•To exit the menu, press SETUP. [Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

• [LT/RT] - For the surround sound output through two speakers.

• [Stereo] - For the stereo output.

• [Multi Channel] - For multi-channel output.

[Digital Audio]

Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).

•[Digital Output] - Select a type of digital output.

•[All] - Support multi-channel audio formats.

•[Off] - Disable digital output.

•[PCM Only] - Downmix to two-channel audio format.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

•[48kHZ] - For discs recorded at sampling rate of 48 kHz.

•[96kHZ] - For discs recorded at sampling rate of 96 kHz.

Note

•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

•The higher the sampling rate, the better the sound quality.

[HDMI Audio]

Select the HDMI audio setting when you connect this product and the TV with an HDMI cable.

•[On] - Allow audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM).

•[Off] - Disable the audio output from HDMI

devices connected to this player. [Audio Sync]

Set the delay time for audio output when you play a video disc.

1.Press OK.

2.Press to set the delay time.

3.Press OK to confi rm and exit.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OK to confi rm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

•[Movie Mode] - Select a sound effect for movies.

•[Music Mode] - Select a sound effect for music.

English

EN 15