19
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Main unit

The buttons on this unit do not work.
Disconnect this prod uct from the power •
outlet for a few minutes, t hen connect again .
No reaction to the remote con trol.
Connect this produc t to the power outlet .•
Point the remote control at t he IR sensor •
located on the front pane l of this product.
Insert the batte ries correct ly.•
Insert new batte ries in the remote con trol.•

Picture

No picture.
See the TVs user manual on h ow to select •
the correct input on t he TV. Change the TV
channel until you see the Ph ilips screen.
If you have turned on the pro gressive scan •
setting or change the T V system sett ing,
switch back to default mo de: 1) Press to
open the disc compart ment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
No picture on HDMI connection.
If this product is conne cted to an unauthor ized •
display device with an HD MI cable, the audi o/
video signal may not be outp ut.
Check if the HDMI cable i s faulty. Replace a •
new HDMI cable.
If this happens when you cha nge the HDMI •
video resolution, yo u have to switch to its
default mode: 1) Press to ope n the disc
compartment. 2) Pre ss the numeric button “1”.

Sound

No audio output from the TV.
Ensure that the audio ca bles are connecte d to •
the audio input of the TV.
Assign the audio input of t he TV to the •
corresponding vide o input. See the T V user
manual for details.
No audio output from the loud speakers of the
audio device (stereo system/amplifi er/receiver).
Ensure that the audio ca bles are connecte d to •
the audio input of the audio d evice.
Turn on the audio device to its cor rect audio •
input source.
Clean discs
Wipe the disc with a micro fi bre cleaning cloth from
the centre to the edge in a straight line movement.

Specifi cations

Note
Specifi cation and design are subj ect to change w ithout noti ce•
USB
Compatibility: Hi -Speed USB (2.0)•
Class support: U MS (USB Mass Stor age Class)•
Video
Signal system: PAL / NTSC•
Composite video outp ut: 1 Vpp ~ 75 ohm•
Component video outp ut: 0.7 Vpp ~ 75 ohm•
HDMI output: 480 i, 480p, 576i, 576p, 720p, •
1080i, 1080 p
Audio
Analog stereo output•
Signal to noise ratio (1 kHz): > 9 0 dB •
(A-weighted)
Dynamic Range (1 kHz): > 80 dB (A -weighted)•
Crosstalk (1 kHz): > 90 dB•
Distortion/noi se: (1 kHz): > 75 dB•
MPEG MP3: MPEG Audio L3•
Digital output•
Coaxial•
HDMI output•
Main unit
Dimensions (w x h x d): 360 x 39 x 209 (mm)•
Net Weight: 1.49 kg•
Power
Power supply rating: 110-240V, 50/60 HZ•
Power consumption: < 10 W•
Power consumption in stan dby mode: < 0.1 W•
Accessories supplied
Remote control and batt eries•
HDMI cable•
Audio/Video cables•
AC power cord•
User Manual•
Laser specifi cation
Type: Semiconductor lase r InGaAIP (DVD), •
AIGaAs (CD)
Wave length: 658 nm (DVD), 790 nm (CD)•
Output Power: 7.0 mW (DVD), 10.0 mW •
(VCD/CD)
Beam divergence: 60 de grees•
9 Troubleshooting
Warning
Risk of electric sho ck. Never r emove the cas ing of the prod uct. •
English
EN