Troubleshooting

Start Up Conditions

THERMAL EXPANSION

Water supply systems may, because of such events as high line pressure, frequent cut-offs, the effects of water hammer among others, have installed devices such as pressure reducing valves, check valves, back flow preventers, etc...to control these types of problems. When these devices are not equipped with an internal by-pass, and no other measures are taken, the devices cause the water system to be closed. As water is heat- ed, it expands (thermal expansion) and closed systems do not allow for the expansion of heated water.

The water within the water heater tank expands as it is heated and increases the pressure of the water system. If the relieving point of the water heater's temperature-pressure relief valve is reached, the valve will relieve the excess pressure. The temper-

ature-pressure relief valve is not intended for the constant

relief of thermal expansion. This is an unacceptable condition and must be corrected.

It is recommended that any devices installed which could create a closed system, have a by-pass and/or the system have an expansion tank to relieve the pressure built by thermal expan- sion in the water system. Expansion tanks are available for ordering through the Maytag Service Specialist. Contact the local water supplier and/or call a Maytag Service Specialist at 1-800-365-0024 for an authorized servicer for assistance in controlling these situations.

STRANGE SOUNDS

Possible noises due to expansion and contraction of some metal parts during periods of heat-up and cool-down do not represent harmful or dangerous conditions.

Operational Conditions

SMELLY WATER

In each glasslined water heater there is installed at least one anode rod (see parts section) for corrosion protection of the tank. Certain water conditions will cause a reaction between this rod and the water. The most common complaint associated with the anode rod is one of a “rotten egg smell”. This odor is derived from hydrogen sulfide gas dissolved in the water. The smell is the result of four factors which must all be present for the odor to develop:

a.a concentration of sulfate in the supply water.

b.little or no dissolved oxygen in the water.

c.a sulfate reducing bacteria within the water heater. (This harmless bacteria is non-toxic to humans.)

d.an excess of active hydrogen in the tank. This is caused by the corrosion protective action of the anode.

Smelly water may be eliminated or reduced in some water heater models by replacing the anode(s) with one of less active material, and then chlorinating the water heater tank and all hot water lines. Call a Maytag Service Specialist at 1-800-365-0024 for an authorized servicer for further information concerning an Anode Replacement Kit #9001453 and this Chlorination Treatment.

If the smelly water persists after the anode replacement and chlo- rination treatment, we can only suggest that continuous chlorina- tion and filtering conditioning equipment be considered to elimi- nate the water problem.

Do not remove the anode leaving the tank unprotected. By doing so, all warranty on the water heater tank is voided.

“AIR” IN HOT WATER FAUCETS

WARNING

HYDROGEN GAS: Hydrogen gas can be produced in a hot water system that has not been used for a long period of time (generally two weeks or more). Hydrogen gas is extremely flammable and explo- sive. To prevent the possibility of injury under these conditions, we recommend the hot water faucet be opened for several minutes at the kitchen sink before any electrical appliances which are connect- ed to the hot water system are used (such as a dish- washer or washing machine). If hydrogen gas is pre- sent, there will probably be an unusual sound simi- lar to air escaping through the pipe as the hot water faucet is opened. There must be no smoking or open flame near the faucet at the time it is open.

RUMBLING NOISE

In some water areas, scale or mineral deposits will build up on your heating elements. This buildup will cause a rumbling noise. Follow “Element Cleaning/Replacement” instructions to clean and replace the elements.

HIGH TEMPERATURE SHUT OFF SYSTEM

The water heater has a high limit shut off system with a reset button located on the thermostat.

Follow the resetting instructions which refer to the high limit behind the access panel.

NOTE: If your water heater is connected to an “OFF PEAK” clock, and uses the “3 wire lead” wiring diagram in the “Wiring Diagram” section, then the water heater will have a hi-limit on both the upper and lower thermostats. Follow the instructions to reset the hi-limit behind the upper and lower access panels.

21

Page 21
Image 21
Maytag HRX30DERT, HRX52DERT, HRX66DERT, HRX52DERS, HRX40DERT Troubleshooting, Start Up Conditions, Operational Conditions

HRX40DERS, HRX82DERT, HRX40DERT, HRX52DERS, HRX66DERT specifications

The Maytag HRX series, comprising the HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models, is designed for those seeking high-quality refrigeration solutions that combine reliability, innovative features, and advanced technology. Each model in this series showcases an array of characteristics that cater to the evolving needs of modern households.

One of the standout features of the Maytag HRX series is its powerful cooling performance, which is achieved through the use of Precision Cooling technology. This technology ensures that your food remains fresh for longer by maintaining optimal humidity levels and temperatures. With a dedicated cooling system, the HRX models effectively reduce temperature fluctuations, preserving the quality and longevity of your groceries.

Another key characteristic of the Maytag HRX series is the SmartSeal design that prevents air leaks and enhances energy efficiency. This feature not only helps to save on energy bills but also contributes to the appliance's overall sustainability. The Energy Star certification found in these models indicates adherence to strict energy efficiency guidelines, ensuring that users enjoy lower environmental impact without compromising performance.

The internal configuration of each model offers adjustable shelving and custom storage options to maximize space. The slide-out shelves provide easy access, while the spacious compartments cater to various food items. The inclusion of bins dedicated to fruits and vegetables ensures that perishables are organized and easily accessible.

The HRX series also boasts advanced temperature management systems. Users can enjoy the convenience of an external temperature display, allowing for quick adjustments without the need to open the refrigerator door. This feature not only increases efficiency but also contributes to maintaining optimal storage conditions.

In terms of durability, the Maytag HRX refrigerators are equipped with robust materials, including stainless steel finishes and reinforced hinges. These constructions ensure that the appliances withstand daily use while maintaining a modern aesthetic that complements any kitchen decor.

In summary, the Maytag HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models are exemplary choices for anyone seeking reliable refrigeration. With features like Precision Cooling, SmartSeal design, generous storage options, and user-friendly technology, they are built to exceed user expectations while providing an energy-efficient and durable solution for preserving food freshness. Whether for a large family or a smaller household, the HRX series caters to various needs and preferences, making them a valuable addition to any kitchen.