Accessories and Tools Needed
Accessories
To simplify the installation Maytag has available the installa- tion parts shown below. You may or may not need all of these accessories depending on your type of installation. Call a Maytag Service Specialist at
EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLON (PART NUMBER ETC2X) AND 5 GALLON (PART NUM- BER ETC5X) CAPACITY
DRAIN PANS AVAILABLE IN 22″ DIAMETER (PART
NUMBER 9001609) FOR WATER HEATERS HAVING A DIAMETER 20″ OR LESS, 24″ DIAMETER (PART
NUMBER 9002769) FOR WATER HEATERS HAVING A DIAMETER 22″ OR LESS AND AVAILABLE IN 28″
DIAMETER (PART NUMBER 9001608) FOR WATER HEATERS HAVING A DIAMETER 26.25″ OR LESS
Tools
You may or may not need all of these tools, depending on your type of installation. These tools can be purchased at your local Maytag store.
•Pipe Wrenches (2) 14″
•Screwdriver
•6 Foot Tape or Folding Rule
•Garden Hose
•Drill
•Pipe dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
PIPE
WRENCH
PHILLIPS SCREWDRIVER
ADDITIONAL TOOLS NEEDED WHEN SWEAT SOLDERING
•Tubing Cutters or Hacksaw
•Propane Torch
•Soft Solder
•Solder Flux
•Emery Cloth
•Wire Brushes
HACKSAW
3/4″ WIRE BRUSH
1/2″ WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
PROPANE TORCH
PIPE DOPE |
|
(SQUEEZE TUBE) |
|
ROLL OF TEFLON TAPE | DRILL |
(Use only on water connec- |
|
tions) | 7 |
|
ROLL OF EMERY | SOLDER FLUX | TUBING CUTTER |
CLOTH |
|
|
