Service and Maintenance (cont’d)

Thermostat Adjustments

The upper and lower thermostats have been factory set at HOT (approximately 120°F) to reduce the risk of scald injury.

The upper and lower thermostats are adjustable if a different water temperature is desired. Read all warnings in the “Temperature Regulation” section before proceeding.

NOTE: It is not necessary to adjust the upper thermostat. However, if it is adjusted above the factory set point of 120°F (HOT) it is recommended that it not be set higher than the lower thermostat setting.

To adjust the temperature setting for both upper and lower thermostats, proceed as follows:

1.Turn “OFF” the electric power to the water heater at the junction box.

WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. Failure to do this could result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

2.Take off the access panel, insulation block and pad.

3.The slotted adjustment (using a screwdriver) can be turned

clockwise () to increase the temperature setting or

counter clockwise () to decrease the temperature setting.

4.Replace the insulation block, pad and access panel.

5.Turn “ON” the power supply.

Anode Rod Inspection

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod sacrifices itself to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not affect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

Anode deterioration depends on water conductivity, not nec- essarily water condition. A corroded or pitted anode rod indi- cates high water conductivity and should be checked and/or

replaced more often than an anode rod that appears to be intact. Replacement of a depleted anode rod can extend the life of your water heater. Inspection should be conducted by a qualified service technician, and at a minimum should be checked annually after the warranty period.

Temperature-Pressure Relief Valve Operation

The temperature-pressure relief valve must be manually oper- ated at least once a year.

TEMPERATURE-PRESSURE

RELIEF VALVE

DISCHARGE PIPE

WARNING

The temperature-pressure relief valve must be manually operated at least once a year. Caution should be taken to ensure that (1) no one is in front of or around the outlet of the temperature-pres- sure relief valve discharge line, and (2) the water manually discharged will not cause any property damage or bodily injury. The water may be extremely hot.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the cold water inlet to the water heater, follow the draining instructions, and replace the temperature-pressure relief valve with a new one.

Failure to install and maintain a new properly listed tempera- ture-pressure relief valve will release the manufacturer from any claim which might result from excessive temperature or pressure.

WARNING

If the temperature-pressure relief valve on the appliance weeps or discharges periodically, this may be due to thermal expansion. Your water heater may have a check valve installed in the water line or a water meter with a check valve. Call

aMaytag Service Specialist at 1-800-365-0024 for an authorized servicer. Do not plug the tempera- ture-pressure relief valve.

16

Page 15 Page 17
Page 16
Image 16
Maytag HRX66DERT, HRX30DERT, HRX52DERT manual Service and Maintenance cont’d, Thermostat Adjustments, Anode Rod Inspection
Page 15 Page 17

HRX40DERS, HRX82DERT, HRX40DERT, HRX52DERS, HRX66DERT specifications

The Maytag HRX series, comprising the HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models, is designed for those seeking high-quality refrigeration solutions that combine reliability, innovative features, and advanced technology. Each model in this series showcases an array of characteristics that cater to the evolving needs of modern households.

One of the standout features of the Maytag HRX series is its powerful cooling performance, which is achieved through the use of Precision Cooling technology. This technology ensures that your food remains fresh for longer by maintaining optimal humidity levels and temperatures. With a dedicated cooling system, the HRX models effectively reduce temperature fluctuations, preserving the quality and longevity of your groceries.

Another key characteristic of the Maytag HRX series is the SmartSeal design that prevents air leaks and enhances energy efficiency. This feature not only helps to save on energy bills but also contributes to the appliance's overall sustainability. The Energy Star certification found in these models indicates adherence to strict energy efficiency guidelines, ensuring that users enjoy lower environmental impact without compromising performance.

The internal configuration of each model offers adjustable shelving and custom storage options to maximize space. The slide-out shelves provide easy access, while the spacious compartments cater to various food items. The inclusion of bins dedicated to fruits and vegetables ensures that perishables are organized and easily accessible.

The HRX series also boasts advanced temperature management systems. Users can enjoy the convenience of an external temperature display, allowing for quick adjustments without the need to open the refrigerator door. This feature not only increases efficiency but also contributes to maintaining optimal storage conditions.

In terms of durability, the Maytag HRX refrigerators are equipped with robust materials, including stainless steel finishes and reinforced hinges. These constructions ensure that the appliances withstand daily use while maintaining a modern aesthetic that complements any kitchen decor.

In summary, the Maytag HRX66DERT, HRX82DERT, HRX30DERT, HRX52DERT, and HRX40DERT models are exemplary choices for anyone seeking reliable refrigeration. With features like Precision Cooling, SmartSeal design, generous storage options, and user-friendly technology, they are built to exceed user expectations while providing an energy-efficient and durable solution for preserving food freshness. Whether for a large family or a smaller household, the HRX series caters to various needs and preferences, making them a valuable addition to any kitchen.
Top Page Image Contents