12 EN
• [Auto Standby]: Enable or disable auto
standby. If enabled, this player switches
automatically to standby after 15
minutes of inactivity (for example, in
pause or stop mode).
• [DivX(R) VOD Code]: Display
the DivX® registration code and
deregistration code.
Picture
1 Press .
2 Select [Setup] > [Video] to access the
video setup options.
• [TV System]: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your
country.
• [Aspect ratio]: Select a picture display
format to t the TV screen.
• [Progressive]: Turn on or off the
progressive scan mode. If a progressive
scan TV is connected to this player,
turn on the progressive scan mode.
• [Picture Setting]: Select a predened
color setting, or customize a setting.
• [Closed Caption]: Enable this feature
to show the sound effects in subtitles.
Applicable only when both a disc and a
TV support this feature.
• [HD JPEG]:Enable this feature to view
high-denition pictures through HDMI
connection.
• [HDMI Setup]:Set up for HDMI
connection.
• [Resolution]:Select a resolution for
high denition videos.
• [HDMI Deep Color]:Create
vivid images with more color
details when the video content is
recorded in Deep Color and the
TV supports this feature.
• [Wide Screen Format]:Select a
display format for wide screen
videos.
• [EasyLink Setup]:See “Use your
DVD player” > “Use Philips
EasyLink” for details.
Note
•To achieve progressive scan pictures, make sure that
your TV supports the progressive scan feature, and
your TV is connected to this player through the Y/Pb/
Pr connectors.
Sound
1 Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
• [Analogue Output]: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
• [Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
• [Digital Output]: Select a type
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats;
[PCM Only] - Downmix to two-
channel audio signal.
• [LPCM Output]: Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output] is
enabled only when [PCM Only] is
selected under [Digital Output].
• [HDMI Audio]: Enable or disable
the audio output through HDMI
connection.
• [Audio Sync]: Set a delay time for
audio output to match the video play.
• [Volume]: Change a volume level.
• [Sound Mode]: Select a preset sound
effect.