•Digital output: 0.5
•Coaxial
•HDMI output
•Sampling frequency:
•MP3: 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz 48 kHz
•WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•MP3: 8 kbps - 320 kbps
•WMA: 32 kbps - 192 kbps
Main unit
•Dimensions (W x H x D): 310 x 39 x 203 (mm)
•Net Weight: 1.35 kg
Power
•Power supply rating: AC
50/60 Hz
•Power consumption: 11 W
•Power consumption in standby mode: < 0 5 W
Accessories supplied
•Remote control and 2 batteries
•User manual
•HDMI cable
•AV cables
Laser specification
•Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
•Wave length: 658 nm (DVD), 790 nm
(CD)
•Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
•Beam divergence: 60 degrees
6 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the player yourself.
If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support.
If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player. Write the numbers here: Model No. _____________________________
Serial No. ______________________________
No picture.
•Refer to the TV user manual for how to select the correct video input channel.
•If you have turned on the progressive scan or changed a TV system setting, switch back to the default setting: 1) Press 
to open the disc compartment. 2) Press DISC MENU (for progressive scan) or SUBTITLE (for TV system).
No picture on HDMI connection.
•If this player is connected to an unauthorized display device, the audio/ video signal cannot be output.
•If the HDMI cable is faulty, replace it with a new HDMI cable.
•If you have changed the setting for HDMI video resolution, switch to its default mode.
No sound output from the TV.
•Make sure that the audio cables are correctly connected between this player and the TV.
EN 15
