Philips DVP6600 Analog output, Lt/Rt, Stereo, Surr, Digital Audio Setup, Digital Output, PCM Only

English

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Analog output	This setting is only required if you have connected the audio
	output of this unit to a stereo device or TV using the analog
	output jack.
	{ LT/RT }	– The connected device has a built-in
		Dolby Pro Logic decoder. It can deliver
		the surround sound through the two
		speakers.
	{ Stereo }	– The connected device can only output
		stereo audio through two speakers.
	{ V SURR }	– For virtual surround sound effects.
Digital Audio Setup	This setting is only required if you have connected the audio
	output of this unit to an amplifier/receiver using the digital
	output jack.
	{ Digital Output }	– { Off }
		Disable digital audio output. Select this
		if you are using the analog audio jacks
		to connect this unit to a TV or Stereo
		system.
		{ ALL }
		The connected device supports multi-
		channel audio formats. The digital audio
		format will be output as on disc.
		{ PCM Only }
		The connected device does not support
		multi-channel formats. All audio signals
		are downmixed to PCM format
		(2-channel).
	{ LPCM Output }	– { 48 kHz }
		Select this to play disc recorded at
		sampling rate of 48kHz.

{ 96 kHz }

Enable 96 kHz output on digital audio if the amplifier/receiver is compatible with high sampling rate audio (88.2 / 96 kHz). However, if the sound output is distorted or there is no sound, change the setting to ‘48 kHz’.

34

1_dvp6600_98_eng12_Final2.indd 34 2007-08-15 4:34:52 PM