Philips DVP720SA manual When no disc is loaded, press, Receiver has a Dolby Digital or DTS decoder

English

Connections

Connecting the power cord	Optional: Connecting to a Multi-
	channel Receiver

				AV Receiver		MULTICHANNEL AUDIO IN
					R	FRONT	CENTER		REAR	R
					L					L
						FRONT	SUBW.		REAR
DIGITAL AUDIO OUT	CVBS		Y	Y				CENTRE
PCM/MPEG2/Dolby Digital
					L	L				L
					R	R				R
COAXIAL OPTICAL			Pr	Pb	STEREO	FRONT			SUB-	REAR
	S-VIDEO	Pr	Pb					WOOFER

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

When no disc is loaded, press

STANDBY ON on the DVD Player front panel,

“NO DISC” may appear on the display panel.

OPEN/CLOSE NO DISC STOP PLAY/PAUSE

Receiver has a Dolby Digital or DTS decoder

1Select one of the video connections

(CVBS VIDEO IN, S-VIDEO IN, SCART, COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the Audio Out Left and Right jack for Front and Rear speakers to the corresponding input sockets on your Receiver (cable supplied).

3Connect the Audio Out for Center speaker and Subwoofer to the corresponding inputs on your Receiver (cable not supplied).

4Set the DVD Player’s Analog Output to ‘Multichannel’ to enable playback of DVDs recorded in Multi-channel. (see page 25 “Setting the analogue output”).

Helpful Hint:

–If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected directly to the subwoofer.

8

01-34 DVP720_AP	8	3139 246 13521
		18/03/2004, 10:38 AM