Manuals / Brands / TV and Video / DVR / Philips / TV and Video / DVR

Philips DVR Automatic TV channel search (Autoinstall)

1 51

Download 51 pages, 1.22 Mb

15

Automatic TV channel search(Autoinstall)

During installation, all available TV channels are searched for and saved. If the channel

assignments of your cable or satellite TV provider change or if you are reinstalling the video

recorder, e.g. after moving house, you can start this procedure again. This will replace the TV

channels already saved with the new ones.

1Switch on the TV set. If required, select the programme number for

the video recorder.

2Press the MENU button on the remote control. The main menu will

appear.

3Select line 'AUTO INSTALL' using P=r or P;q .

4Press OK .

AUTO INSTALL

SEARCHING

00 TV CHANNELS FOUND

ƒƒƒƒƒƒƒ__________________

PLEASE WAIT...

5'Autoinstall' starts. Wait until all TV channels have been found. This

can take several minutes.

6When Autoinstall is complete, 'STORED' will briefly appear on the TV

screen.

Date and time have been set and saved.

7To end, press MENU .

You can read about how to search for a TV channel manually in the section 'Manual TV channel

search'.

ENGLISH

Installing your video recording

Contents

Main Table of contents A B Table of contents C D Page The remote control Additional TV functions Front of the device The symbols on your video recorder display A Dear Philips customer, Phil Specifications Supplied accessories Important notes regarding operation Special functions of your new video recorder MODEL NO. VR670B-670W/07 PROD. NO. .................. Important information for customers in Great Britain B Preparing the remote control for operation Connecting your video recorder to the TV set Connecting with a scart cable Connecting without a scart cable Connecting additional devices C Initial installation Decoder allocation BBC1 Manual TV channel search Using the satellite receiver Automatic TV channel search (Autoinstall) Monitor function Sorting and clearing TV channels manually Page Setting the time and date 19 D Important notes for operation Emergency exit Navigation in the screen menu E Playing cassettes 0:00: Playing back NTSC cassettes Displaying current tape position Searching for a tape position with picture (scanning) 0:30: Still picture / slow motion 0:00: 0:30: 0:00: 25 F Eliminating picture interference Optimising tracking Optimising still picture G General information Recording without automatic switchoff Recording with automatic switchoff (OTR OneTouchRecording) Preventing accidental erasing of cassettes Lining up recordings (assemble cut) Selecting the recording speed (SP or LP) Automatic controlled recording from a satellite receiver (RECORD LINK) H General information Programming a recording (with 'VIDEO Plus+') Page Problems and solutions for programmed Programming a recording (without VIDEO Plus+) Page Problem solving for programmed Programming a recording with 'TURBO TIMER' 20:00 22:00 Problems and solutions for programmed How to check, change or delete a programmed recording (TIMER) I Changing the video (colour) system Child lock Switching the onscreen display (OSD) off or on Switch off the clock display Continuous playback Automatic switchoff Selecting the sound channel 44 J Suppressing interference Optimising the modulator 45 Switching the modulator on / off Suppressing interference 46 K Before you call an engineer HOTLINE telephone numbers Your video recorder does not respond to any button being pressed: Resetting devices to default factory settings Cassette is jammed in the video recorder: Remote control does not work: No picture when you play a cassette: 47 Before you call an engineer