Philips DVR Automatic controlled recording from a satellite receiver (RECORD LINK)

29
Automatic controlled recording from a
satellite receiver (RECORD LINK)
This function automatically starts recording on the switched-off video recorder when a video
signal is recognised through the connected scart cable. If your satellite receiver has a
programming function, the recording will start automatically (as long as the satellite receiver is
switched on).
1Switch on the TV set. If required, select the programme number for
the video recorder.
2Press MENU on the remote control. The main menu will appear.
3Select line 'SPECIAL SETTINGS' using P=r or P;q and confirm
with OK .
SPECIAL SETTINGS
OSD è ON p
CLOCK DISPLAY OFF
RECORD LINK OFF
REPEAT PLAY OFF
________________________________
EXITpMENU STOREpOK
4Select line 'RECORD LINK' using P=r or P;q .
5Select function 'ON' with QSr or SqP .
Switching off 'Record Link'
To switch off the function, select 'OFF'.
6Confirm with OK .
7To end, press MENU .
8Insert a cassette.
9Use a scart cable to connect scart socket EXT.2 AV.2 on the video
recorder to the corresponding scart socket on the satellite receiver.
0Programme the satellite receiver with the required information
(programme number of the TV channel, start time, end time).
If necessary, please see the operating instructions for your satellite
receiver.
ASwitch off the video recorder with STANDBY/ON m.
The video recorder is now ready to record. The beginning and end of the recording is
controlled via scart socket EXT.2 AV.2 .
When this function is switched on, ' x' will appear on the video recorder display.
ENGLISH
Manual recording