BBC1
20:00
22:00
|
| ENGLISH | |
Programming a recording with | |||
|
| ||
'TURBO TIMER' |
|
| |
|
|
| |
|
|
|
With this function, programming a recording that takes place within the next 24 hours, will be quick and easy. The following
Programme number = the programme number currently selected (TV channel) Start time = current time
End time = current time +2 hours
1Press TURBO TIMER on the remote control.
The current set programme number will appear in the display, for instance, 'PROG. 01'. If required, you can change this using P ;q or P =r .
a'CLK' will flash in the video recorder display
b This display means that the video recorder clock is not set correctly. Please read the section 'Setting the time and date' in chapter 'Installing your video recorder'
2Press TURBO TIMER .
The current time (= start time) will appear in the display, for instance, 'START 20:00'. If required, you can change this using P ;q or P =r .
3Press TURBO TIMER .
The end time will appear in the display, for instance, 'END 22:00'. 'END 22:00'. If required, you can change this using P ;q or P =r .
4Press TURBO TIMER .
'OK' will briefly appear in the video recorder display. Programming is now complete.
5Insert a cassette with an intact security tab (unprotected).
6Switch off with STANDBY/ON m .
The programmed recording will only function when the video recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video recorder display.
Programming a recording (TIMER) | 35 |
|
