ENGLISH 7
◗Do not hold the appliance with the dust compartment pointing upwards and do not tilt the appliance to one side when sucking up liquids.
◗Always switch the vacuum cleaner off after use.
◗Keep the appliance out of the reach of children.
◗The voltage on the contact strips in the charging unit is low (max. 12 volts) and therefore not dangerous.
◗Never block the exhaust air openings during vacuuming.
◗Switch the appliance off when recharging it.
◗When the appliance has been used to suck up liquids, empty and dry the dust compartment before storing the appliance in the charging unit.
◗To avoid the risk of electric shock, be careful when drilling holes in the wall to attach the charging unit, especially close to a wall socket.
Preparing for use Installing the charging unit
1You can attach the charging unit to the wall as indicated in the figure (fig. 2).
If you attach the charging unit to the wall, the space between the screw holes should be 70 mm.
2You can also place the charging unit on a horizontal surface (e.g. a table or desk) (fig. 3).
3Excess mains cord can be wound round the charging unit (fig. 4).
Charging the appliance
Charge the appliance for at least 16 hours before you use it for the first time.
1Insert the adapter into the wall socket.
2Place the vacuum cleaner on the charging unit (fig. 5).
