Philips FC6055 manual Using the appliance, Brush, crevice tool and squeegee

8ENGLISH

◗The charging light will go on to indicate that the appliance is charging (fig. 6).

BThe charging light will stay on as long as the appliance is connected to the charging unit and the adapter is in the wall socket.

BThe charging light does not give any information about the charge level of the built-in batteries.

Using the appliance

1Push the on/off slide forwards to switch the appliance on (fig. 7).

2Push the on/off slide backwards to switch the appliance off (fig. 8).

3Leave the adapter in the wall socket and always put the vacuum cleaner back onto the charging unit immediately after use, even if the batteries are still almost fully charged.

Brush, crevice tool and squeegee

This appliance comes with three accessories:

-a brush tool to clean delicate surfaces;

-a crevice tool to clean hard-to-reach places;

-a squeegee to suck up liquids.

1Take the accessory you want to use from the charging unit.

2Attach the accessory to the nozzle of the appliance (fig. 9).

◗When sucking up liquids, hold the appliance with the nozzle pointing downwards at an angle of 30c. Make sure the squeegee touches the surface to be cleaned. Do not tilt the appliance to one side.

Stop sucking up liquids when the liquid level inside the dust compartment has reached the maximum indication line.

◗Never hold the appliance with the on/off slide pointing downwards when the dust compartment is filled with liquid (fig. 10).