Philips Flat Panel Television 0809, Remote Control USE with Accessory Devices Search Method

REMOTE CONTROL USE WITH ACCESSORY DEVICES - SEARCH METHOD

Your TV remote can be set to work various

external devices such as VCRs, Cable Boxes, Satellite Receivers, DBS, DVD, etc. by what is called the search method of remote control programming.

If the “Remote Code” number method shown on the previous page did not set your remote to work your external device, then follow the easy steps listed below.

Satellite Receiver
	Cable Converter
	070809 06
VCR	07

Please read steps 1-4 before beginning.

1 Press the POWER button on the device your are attempting to program to turn it ON.

2 Place the TV/DVD/ACC Mode

Switch in the proper position.

1

06	0809
	070809

3 Press the • RECORD and the AUTO SOUND buttons simultaneously and

hold them down. The remote will con- tinue to send programming codes, one ever 1.5 seconds.

4 The device will begin to change chan- nels after the remote identifies the cor- rect code. When the channels start to change release the • RECORD and AUTO SOUND buttons. The remote should be ready to operate the device.

3 PIP POSITION CC 4

	TV	PROG. LIST	CLOCK
2	DVD
	SLEEP	TV/VCR	SOURCE	FORMAT
	ACC
		A/CH
	AUTO	ACTIVE		AUTO
	SOUND	CONTROL		PICTURE
3				SURR.
	MENU			SOUND

MUTE

HELPFUL HINT

This method can take several minutes to per- form.

Don’t let the device scan up more than five channels. If you do the remote may pass up the right code and another search cycle will have to be repeated.

If no channel change happens within two minutes, repeat steps 1-4. Should a channel change still not occur, the remote will not work the desired device.

NOTE: Setting up the remote is for use with external accessory devices only and not for use with other television brands.

VOL CH

RADIO

PC TV HD

1 2 3

4 5 6

7 8 9

STATUS/EXITSURF

0

41