Clock/Timer
English | 2 Press CD 1/2/3, TUNER or TAPE to select |
| |
| the desired source. |
| ➜ “CD1 [or 2, 3] XX:XX" indicates the CD |
| mode is selected. |
| ➜ “TU XX:XX” indicates the Tuner mode is |
| selected. |
| ➜ “TA1 [or 2] XX:XX” indicates the Tape |
| mode is selected. |
| ● Before setting timer, make sure the music source |
| has been prepared. |
| CD 1/2/3 – Load the disc(s). |
| TUNER – tune to the desired radio station. |
| TAPE – load the prerecorded tape into tape |
| deck. |
| 3 Press à or á on the system repeatedly to set |
| the hour for the timer to start. |
| 4 Press í or ë on the system repeatedly to set |
| the minute for the timer to start. |
| 5 Press CLOCK•TIMER to store the timer. |
| ➜ "TIMER ON" is displayed, followed by the set |
| timer "XX:XX" and the selected source. |
| ➜ remains on the display. |
| ● At the preset time, the selected sound source |
| will play. |
| To exit without storing the setting |
| ● Press Çon the system. |
| Notes: |
| – When the preset time is reached and the |
| selected disc tray is empty, the next available disc |
| will be selected. If all the disc trays are not |
| available,Tuner will be selected automatically. |
| – During timer setting, if no button is pressed |
| within 90 seconds, the system will exit timer setting |
| mode automatically. |
Deactivating the timer
1Press and hold CLOCK•TIMER for more than two seconds.
2Press Ç on the system to cancel the timer.
➜ "CANCEL" is displayed and the 
disappears.
26
pg | 26 |
Activating the timer (for the same preset
time and source)
1Press and hold CLOCK•TIMER for more than two seconds.
2Press CLOCK•TIMER again to store.
➜ The last set timer information is displayed for a few seconds and 
is shown.
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1Press SLEEP on the remote control repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 …
➜"SLEEP XX" or "OFF" is displayed. "XX" is the time in minutes.
2When you reach the desired length of time, stop pressing the SLEEP button.
➜
is shown, except for "OFF" mode.
➜The sleep timer is now set. Before the system switches to standby mode, a countdown of 10 seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™"SLEEP"
To check the remaining length of time after sleep timer is activated
●Press SLEEP once.
To change the preset sleep timer
●Press SLEEP again while the remaining sleep timer is shown.
➜ The display will show the next sleep timer options.
To deactivate the sleep timer
●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.
4/17/02, 10:37 AM 3139 115 21422
