Instant Timer Recording ITR, Tape Remaining Time

EN 25

Recording Features

Record One Programme While Watching Another

If your recorder is connected to the TV via the AV connection, press TV/VCR. The recorder’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the recorder’s PR buttons is recorded on the tape.

●If a decoder is connected to the recorder ( pg. 46), you can select a scrambled channel as well with the TV channel controls.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

1Start recording.

Press 7 on the recorder.

2Engage the ITR mode.

Press 7 again. ““ blinks and “0:30” appears on the front display panel.

3Set the recording duration.

If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the 7 button on the recorder’s front panel.

Elapsed Recording Time Indication

1Set the counter display.

Press – –:– – until a counter reading appears on the front display panel.

●The front display panel shows

the counter reading with “:” lit.

2Reset the counter.

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape appears.

●The front display panel shows

the tape remaining time with “:” blinking.

● By pressing the – –:– – button, you can change display to

show the channel position*, clock time, counter reading or tape remaining time.

* Channel position is not displayed during playback.