JVC HR-S7950EU Next Function Memory, Repeat Playback, Manual Tracking, Soundtrack Selection

EN 23

Next Function Memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds. b- For Automatic Power Off

Press 3, then press 1 within 2 seconds. c- For Automatic Timer Standby

Press 3, then press # (TIMER) within 2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set to “ON” ( 49) and if any timer programming has been made. If “AUTO TIMER” is set to “ON”, the recorder directly goes into the Timer-Standby mode at the same time when the 1 is pressed for the Automatic Power Off.

Repeat Playback

Your recorder can automatically play back the whole tape 100 times repeatedly.

1Start playback.

Press 4.

2Activate Repeat Playback.

Press 4 and hold for over 5 seconds, then release.

●The Play indicator ($) on the front display panel blinks slowly.

●After playing back a tape 100 times, the recorder stops automatically.

3Stop Repeat Playback.

Press 8 at any time.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTE:

Repeat playback is not possible with a cassette recorded in EP mode.

Manual Tracking

Your recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.

1Override automatic tracking.

During playback, press p on the remote control.

2Adjust the tracking manually.

Press PR + or – on the remote control.

●Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK	USE
On-Screen Display
HI FI	For Hi-Fi stereo tapes
L j h R
HI FI	For main audio of Bilingual tapes
L j
HI FI	For sub audio of Bilingual tapes
h R
NORM	For audio-dubbed tapes
HI FI	For audio-dubbed tapes
NORM

NOTES:

●“HI FI L j h R” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 26.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 49).