JVC HR-S7950EU Disengage the timer mode, Cancel or change a programme, Return to the timer mode

EN 33

Check, cancel and change programmes

A Disengage the timer mode.

Press # (TIMER), then press 1.

B Access the Programme Check screen/display.

Press ".

C Access the Programme screen/display.

Press " again to check more information. Each time you press ", the next programme’s information appears.

To cancel or change a programme...

D Cancel or change a programme.

Press & to cancel a programme. To change programme settings, press the appropriate button: START+/–, STOP+/–, DATE+/–, PR+/–, VPS/PDC (number key “7”), DAILY (number key “8”), WEEKLY (number key “9”) and/ or SP/LP/EP (p).

●You can change “TV PROG” to “SAT” for the channel position by pressing the number key “0”.

●If you do not want to edit the programme title, skip steps 5 and 6.

E Access the Title Edit screen.

Press the number key “1”.

The Title Edit screen appears.

● You can access the title edit screen only when “PROG. NAVIGATION” is set to “ON”. ( pg. 50)

F Enter the programme title.

Press the number keys and e to enter characters, then press OK. For details, refer to “Entering Character” on page 39.

G Return to the normal screen/display.

Press " as many times as necessary. If there are still some programmes remaining, go on to step 8.

H Return to the timer mode.

Press # (TIMER).

NOTE:

You can also check the programmes on the front display panel even if the recorder’s power is off (unless the recorder is in the Power Save mode  pg. 51) or the recorder is in the Timer mode; however, it is not possible to cancel or change the programmes.

The front display panel shows the programme number. Pressing OK changes the display to the programme start time, the stop time, the date, the tape speed then the channel position.