EN 49

 

 

* The default setting is bold in the table below.

 

 

8 DIGITAL TBC/NR

Your recorder is equipped with the Digital TBC (Time Base Corrector) that

ON

removes jitter from fluctuating video signals to deliver a stable picture even

OFF

with old tapes and rental cassettes.

 

The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables

 

clear picture reproduction is also linked to this function.

 

We recommend that you set “DIGITAL TBC/NR” to “ON” when...

 

... playing back a tape recorded on a camcorder.

 

... playing back a tape repeatedly used.

 

... using this video recorder as the source player for editing.

 

NOTES:

 

 

If you play back a tape recorded under poor TV reception condition, the picture may

 

become more stable with Digital TBC/NR set to off.

 

When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types

 

of signals are recorded (using a PC or some character generators), the playback

 

picture may be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.

 

When playing back a MESECAM tape, Digital TBC/NR does not function even

 

though “DIGITAL TBC/NR” is set to “ON”.

 

 

8 B.E.S.T.

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to

ON

“ON” or “OFF” ( pg. 27).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality according to

AUTO

your preference. Normally select “AUTO”.

EDIT

AUTO:

Provides the optimised picture benefits of the B.E.S.T. Picture

SOFT

EDIT:

System.

SHARP

Minimizes picture degradation during editing (recording and

 

SOFT:

playback).

 

Reduces image coarseness when viewing overplayed tapes

 

SHARP:

containing a lot of noise.

 

Clearer, sharper-edged picture when viewing images with lots of

 

 

flat, same-coloured surfaces such as cartoons.

 

NOTES:

 

 

When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change

 

until you select another mode.

 

When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish

 

dubbing the tapes.

 

When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from

 

“AUTO” to “NORM”.

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is automatically engaged when

ON

the recorder power is turned off, and automatically disengaged when the

OFF

recorder is powered back on.

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are

 

disabled while the Timer mode is engaged. To disengage the timer, press # (TIMER).

 

 

8 O.S.D.

When this function is set to “ON”, various operational indicators appear on

ON

the TV screen. Messages appear in the selected language ( pg. 15, 16).

OFF

NOTES:

 

 

 

 

When you use this recorder as the source player for editing, be sure to set “O.S.D.”

 

to “OFF” before starting.

 

During playback, the operation mode indicators may be disturbed depending on the

 

type of tape being used.

 

 

 

Page 49
Image 49
JVC HR-S7950EU With old tapes and rental cassettes, Clear picture reproduction is also linked to this function, System