EN 9
Buttons with a small dot on the left side of the name can also be used to operate your JVC TV while holding down the TV button. ( “Operating JVC TVs” below)
This remote control transmits A code signals only; it is not applicable to B code signals.
How To Use
The remote control can operate most of your video recorder’s functions, as well as basic functions of JVC TV sets. ( “Operating JVC TVs” below)
●Point the remote control toward the receiving window.
●The maximum operating distance of the remote control is about 8 m.
Operating JVC TVs
To operate your TV, while holding down the TV button, press the corresponding button: 1, TV/VCR, TV PR
^(TV Muting).
NOTES:
●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.
●Depending on the type of JVC TV, some or all functions may not be operated using the remote control.
●If the remote control doesn’t work properly, remove its batteries, wait a short time, replace the batteries and then try again.
