Troubleshooting
English
GENERAL
The system does not react when | – Remove and reconnect the AC power plug and | |
buttons are pressed. |
| switch on the system again. |
|
|
|
Sound cannot be heard or is of poor | – | Adjust the volume. |
quality. | – | Disconnect the headphones. |
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Make sure the
The left and right sound outputs are reversed.
– Check the speaker connections and location.
The remote control does not function properly.
–Select the source (CD 1/2/3 or TUNER, for example) before pressing the function button (É,í,ë).
–Reduce the distance between the remote control and the system.
–Insert the batteries with their polarities (+/– signs) aligned as indicated.
–Replace the batteries.
–Point the remote control directly towards the IR sensor .
The timer is not working.
–Set the clock correctly.
–Press and hold CLOCK•TIMER to switch on the timer.
–If recording or tape dubbing is in progress, stop recording.
Not all lighted buttons are showing light. | – Press DIM to select DIM OFF display mode. | |
The Clock/Timer setting is erased. | – | Power has been interrupted or the power cord |
|
| has been disconnected. Reset the clock/timer. |
|
|
|
The system displays features | – | Press and hold Çon the system to switch off |
automatically. |
| the demonstration. |
|
|
|
30
pg | 30 | 4/17/02, 10:37 AM 3139 115 21422 |
