Philips FW-V520 manual Select a desired track/passage, Programming the disc tracks

CD/VCD/MP3-CD Operation

E	Select a desired track/passage
ngl	To search for a particular passage during
is	playback
h
	● Press à or á to select 4 different search
	speed.
	➜ "FRX1"; "FRX2"; "FRX3" or "FRX4" will be
	displayed on the TV screen when you select a
	fast rewind search.
	➜ "FFX1"; "FFX2"; "FFX3" or "FFX4" will be
	displayed on the TV screen when you select a
	fast forward search.
	➜ Normal playback will begin at the end of the
	fast rewinding or forwarding of the selected
	track.
	● Play returns to normal when PLAYÉÅ is
	pressed or when a new track is selected.
	To select a desired track
	● Press í or ë repeatedly (or Digits 0–9on
	the remote control) until the desired track
	appears on the display.
	● If playback is stopped, press PLAYÉÅ to start
	playback.
	Note:
	– Maximum track selection from digital keys on
	the remote control is 199 for MP3-CD and 99 for
	VCD/CD.
	For MP3-CD only
	To select a desired Album
	● Press ALBUM -/+(à or á) repeatedly
	until the desired Album appears on the display.
	➜ ALB will start flashing.
	➜ “AXX T001” will be displayed after the
	album name scrolled through the display briefly.

To select a desired Title

●Press TITLE -/+(í or ë) repeatedly until the desired Title appears on the display.

●Use the digital keys on the remote control to select the track under current Album directly.

➜TITLE will start flashing.

➜“A01 TXXX” will be displayed after the title name scrolled through the display briefly.

Note:

–"A" represents ALBUM and "T" represents TRACK, "XX" or "XXX" is the current selected Album or Track number.

18

pg 001-032/V520/21-Eng 18

Programming the disc tracks

Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.

1Load the desired discs on the disc tray (refer to “Loading Discs”).

2Press the VCD (CD 1•2•3) button to select the disc tray.

➜Programming can only be done on the selected disc.

3Press PROG to start programming.

➜PROG will start flashing.

➜It will cancel any previously programmed tracks and selected repeat mode.

4Press í or ë repeatedly (or Digits 0–9on the remote control) to select the desired track.

¶For MP3-CD, press ALBUM -/+and TITLE

-/+to select the desired Album and Title for programming.

5Press PROG to store the track.

¶Repeat steps 3–5to store other tracks.

6Press PLAYÉÅ to start programme playback. ➜ "PLAY PROGRAM" will be displayed.

●To end programming without starting playback, press Ç once .

➜ The total number of tracks programmed and the total playing time will appear on the display.

Notes:

–Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks.

–For MP3-CD, total playing time will not be shown.

–If the total playing time is more than "99:59", then "--:--" will appear on the display instead of the total playing time.

–If you attempt to programme more than 99 tracks, "PROGRAM FULL" will be displayed.

–During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically.

To review the programme

●Stop playback and press í or ë repeatedly.

●To exit review mode, press Ç.

12/11/01, 5:05 PM 3139 115 21093