Philips FW-V520 manual Resume, Slow, Vocal, Key Control I È, Echo

CD/VCD/MP3-CD Operation

E n g l i s h

Resume

This feature is also applicable to audio CD (except for MP3-CD).

●In stop mode, press RESUME on the remote control to start playback again from where you have stopped.

Note:

–Resume information is lost if you have changed the disc, opened the disc tray, change source or disconnected the system from the power supply.

–Resume is not available when PBC mode is switched on.

Slow

1Press SLOW on the remote control to watch a VCD at a slower speed.There are 3 types of slow modes to select.

➜The sound will be muted.

➜On TV screen,“SLOW 1”, “SLOW 2” or

“SLOW 3” will be displayed.

2To resume playback at normal speed, press

PLAYÉÅ.

Vocal

This feature allows you to fade out the original vocal from a karaoke VCD.This feature is used together with Echo mode.You can also use it to select the different audio modes.

●Pressing VOCAL on the remote control repeatedly allows you to select the following modes.

➜ STEREO ™ STEREO VOCAL LEFT ™ STEREO VOCAL RIGHT ™ MONO LEFT ™ MONO RIGHT ™ STEREO …

STEREO – same effect as the original recorded disc.

STEREO VOCAL LEFT/RIGHT – fade out the original vocal for special recorded Karaoke disc only (with the ECHO mode switched on).

MONO LEFT/RIGHT – select the language on a bilingual VCD.

Ensure that Echo mode is switched on

when press VOCAL to fade out the original vocal during STEREO VOCAL LEFT/RIGHT mode.

22

Key Control ( I È i )

This feature allows you to change the key tone of your vocal range.

●Press I on the remote control to decrease vocal key level.

➜"KEY -X" and appears on the display.

●Press i on the remote control to increase vocal key level.

➜"KEY +X" appears on the display.

●Press È on the remote control to restore vocal key to original setting.

➜"KEY FLAT" appears on the display.

Note:

–“X” denotes the key level.

Echo

This feature allows you to add echo while singing or talking through a microphone.

●Press ECHO -/+on the remote control to decrease, increase or switch off the echo effect.

➜ "ECHO -X", "ECHO +X" or "ECHO OFF" appears on the display.

Notes:

–“X” denotes the echo level.

–You are advised to switch off the echo effect when not using the feature.

–If microphone is not inserted,“INSERT MIC” will be displayed.

–Echo will switch off automatically when unplug the microphone from the system.

pg 001-032/V520/21-Eng 22 12/11/01, 5:05 PM 3139 115 21093