Philips FW-V520 manual Title/Album Name, Repeat, To erase the entire programme, Normal playback

		CD/VCD/MP3-CD Operation
	To erase the entire programme
			Title/Album Name
● Press Ç once when playback is stopped or			This feature use to display the title and album
	twice during playback.
			name for MP3-CD.
	➜ "PROGRAM CLEARED" will be displayed.
		● Press TITLE/ALBUM NAME repeatedly to
	➜ PROG will disappear from the display.

Note:	display the title or album name.
	➜ TITLE will start flashing if title name is
– The programme will be erased if you change
	displayed.
source, select another disc tray or disconnected the
	➜ ALB will start flashing if album name is
system from the power supply.
	displayed.

E n g l i s h

Repeat

You can play the current track/disc/programme repeatedly during playback.

1Press REPEAT on the remote control

repeatedly to select various repeat modes.

●In normal playback

➜"REPEAT TRACK" – to repeat the current track.

"REPEAT DISC" – to repeat the entire disc.

➜RPT appears on the display.

●In programme playback

➜"REPEAT TRACK" – to repeat the current programmed track.

"REPEAT PROGRAM" – to repeat all programmed tracks.

➜RPT and PROG will appear on the display.

●The current track/disc/programme will now be played repeatedly until you press Ç.

2To resume normal playback, press REPEAT until the "REPEAT OFF" mode is displayed. ➜ RPT will disappear from the display.

For Recording, please refer to “Tape Operation/Recording”.

19

pg 001-032/V520/21-Eng 19 12/11/01, 5:05 PM 3139 115 21093