Philips FWD798/37B Tuner Operations, Tuning to radio stations, Presetting radio stations

English

Tuner Operations

	IMPORTANT!		➜ PROG will start to flash.
	–Make sure FM and AM antennas are		➜ The system will start to search all radio
	connected.		stations on the FM band, then AM band.
			➜ All radio stations with strong signal strength
			will be stored automatically.
	Tuning to radio stations
1 Press TUNER to select “FM XX” or “MW XX”			➜ The system will stop searching when all
			available radio stations are stored or when the
	(AM X).		memory of 40 preset radio stations is full.
2 Press and hold 1 / ¡ on the system or on			➜ The first preset radio station will then be
			played when completed.
	the remote control until the frequency indication
	starts to change, then release.		To stop storing the automatic preset
➜The next radio station will be tuned
			● Press 7 to stop storing the automatic preset.
	automatically.
3 To tune a weak station, press 1 / ¡ on the			Note:
	system or on the remote control to search until		– If no preset number is selected, automatic
	a radio station with sufficient signal strength is		preset will begin from “01” and all your former
	found.		presets will be overridden.
	Presetting radio stations
You can store up to 40 preset radio stations in
	the memory, starting from FM and followed by
	AM bands.
		Automatic preset programming
You can start automatic presetting from a
	selected preset number.

1Press TUNER (BAND) to select TUNER mode.

➜The current radio frequency will appear on the display.

To begin automatic preset from a desired preset number

●Press O / P or numeric keys (0-9) to select the desired preset number.

2Press and hold PROGRAM for 3 seconds, “AUTO SEARCHING” appears on the display.

38